破碎系統設備 闆式給料機
結構特點
重型闆式給料機用于料倉下，可将大塊礦石卸出并均勻地向破碎機喂料，廣泛 應用于水泥、建材、冶金、礦山等行業。
●結構強度大，采用減震緩沖專利技(jì )術可承受料倉的壓力及大塊礦石卸入料倉的沖擊載荷。
High structural strength and patented vibration suppression technology. Able to sustain the pressure from
the material bin and the impact load from big boulders being discharged into the bin;
●槽闆堅固結實，采用履帶牽引鏈，耐磨損，免潤滑。
The durable grooved plates are driven by pulling chains, which are wear-resistant and lubricant-free;
●槽闆下的滑道采用專有技(jì )術自潤滑材料制造，使用簡單，工作可靠。
The sliding way under the grooved plates is made from self-lubricating material, which is easy to use and
operates reliably;
●傳動部分為軸端懸挂的行星齒輪減速器，由變頻調速電機驅動，給料能力可大範圍調節，滿足破碎機工作的
需要。
The planetary gearbox attached to the driving is connected to a shaft and driven by variable frequency
motor, enabling the feeding capacity to be adjusted within a wide range, thus matching the requirements
of the crusher;
●根據需要确定給料機的長度，最大安裝傾角可達 25 度。
Feeder length is determined by actual requirements, with maximum inclination up to 25 degrees.
技(jì )術參數
